DIY Tabletop Flocked Christmas Tree
Learn how to make a tabletop flocked Christmas tree to decorate your home. This DIY flocked tabletop tree with lights can also be used to decorate a wood lantern. It can also be made in various sizes.

DIY Flocked Christmas Tree
As soon as we finished making our DIY Wood Lantern, we immediately made a small flocked tree to put inside it. In fact, we made a couple of them because they are really easy and fun to make, just my type of Christmas craft!



This post also contains some affiliate links for your convenience. Click here to read my full disclosure policy.
How to make a DIY Tabletop Flocked Christmas Tree
Supplies:
- Wood
- Dowel (1/2′′ thick)
- Carpenter’s glue
- Sandpaper
- Flocked greenery picks
- Green florist wire
Tools:
- Glue gun
- Miter saw
- Drill press or drill
- Wire cutters
Wood cut pieces:
- Wood base: 3′′ by 3′′, ¾” to 1 inch thick
- Dowel: 13 1/2′′ long, 1/2′′ thick
Instructions:
Step 1: Start by making a wood base that measures 3′′ by 3′′ using a miter saw.

Step 2: Mark an X in the center of the wood base.


Step 3: Using a drill or drill press equipped with a 1/2′′ drill bit, drill a hole in the center of the X without going completely through the base.



Use an eraser or sandpaper to remove pencil marks.
Step 4: Cut the dowel down to 13.5′′.
We used a miter saw, but you can easily use a handsaw.


Step 5: Put carpenter’s glue inside the hole of the base and insert the dowel. Let it dry.



Step 6: Use wire cutters to cut the flocked greenery picks in various lengths. We cut most of ours to about 6 inches.



If you were unable to find flocked greenery picks, you can easily flocked regular greenery picks too. This DIY flocking video shows you how to flock various items.
Step 7: Fasten the pieces onto the wood dowel using hot glue, starting at the lower part of the dowel. Work your way around the dowel gradually going up the dowel.









Step 8: Once you reach the top of the dowel, make a cluster of greenery and wrap the ends together using green wire. Use wire cutters to cut the extra wire.





Step 9: Add hot glue at the top of the dowel and place the greenery cluster over it.



Step 10: If the dowel is still exposed in areas, add more greenery.



And that’s it, you now have a small flocked Christmas tree!
DIY Small Flocked Christmas Tree
You can add lights in the tree to give it that extra special touch. I wrapped fairy lights around mine and I absolutely love the look.
Doesn’t it look great inside the lantern and next to the Christmas tree wood lantern?

My daughter has asked if we could make a bigger version of it, I say Why Not?! We will start working on one shortly and show you how it turned out!
I hope you have enjoyed this tutorial! If you did, check out these DIY Christmas projects too!
